|
Stage
II 250-280HP -
$
1950.00 |
| |
>
Garrett/Honeywell GT25/T28 Turbocharger
> Dual Ball Bearing Trim
> Factory Internal Wastegate
> Exhaust Manifold Adapter Plate
> CNC Inlet Adapter - 44mm outer diameter
(1/4" thick)
> Exhaust Downpipe - 55mm Standard, 75mm
Option
> CNC Outlet Adapter - 50mm outer diameter
> 2 Water Banjo Fittings (14mm)
> 2 Water Hoses (10")
> Oil Feed Fitting Adapter
> Oil Feed Line (48")
> High Rate Fuel Pressure Regulator
> EPROM, MK4, 18T Stage II
|
| |
>
Accessory : |
8mm
Studs(11) , 8mm nuts (11)
8mmà6mm Studs (2), 8mmà6mm nuts (2)
6mm bolts (3)
10mm bolts (3)
Washers (20)
KO3 Turbo -> Manifold Gasket
T25 Gasket
Oil Return Gasket |
| |
|
|
|
Stage
III 300HP -
$
3195.00 |
| |
>
Turbo Manifold 20V 1.8T
> Garrett/Honeywell GT30R
> Dual Ball Bearing Trim
> External Tial Wastegate 35mm
> Oil Feed Set
> Oil Return Set
> Hardware kit, 1.8T
> Turbo Downpipe 3"
> Inlet Pipe Set 1.8T
> Injector Set, 310CC
> EPROM, MK4, 18T Stage III |
| |
|
|
|
Stage
IV 350HP -
$
3995.00 |
| |
>
Turbo Manifold 20V 1.8T
> Garrett/Honeywell GT30R
> Dual Ball Bearing Trim
> External Tial Wastegate 35mm
> Oil Feed Set
> Oil Return Set
> Hardware kit, 1.8T
> Turbo Downpipe 3"
> Inlet Pipe Set 1.8T
> Injector Set, 475CC
> Greddy Profec-B Electronic Boost Controller
> EPROM, MK4, 18T Stage IV
|
|
Intercooler Kit is not included with Stage III/IV
18T Kit. Must Purchase Separately |
|
|
|
Disclaimer Statement
Our turbo components are manufactured and sold for
racing use only. Please check local emissions laws
before ordering.
Absolutely no retail sales of turbo components in
the state of California.
JNG stands behind the quality of each manufactured
component. We assume no liability for any damages
that might result from the installation and use of
our turbo components. By purchasing our products,
the buyer agrees to assume all liabilities and
responsibilities for the outcome resulting from the
installation of these products. |
