|
Brembo
Grand Turismo System
Brembo Gran Turismo Systems provide
excellent stopping power in everyday traffic, as well as superior high
performance street and track driving. They are designed to bolt onto the
vehicle’s original suspension, and are fully compatible with the
vehicle’s stock brake master cylinder and anti-lock braking system
(ABS).
While most Brembo Gran Turismo Brake System packages have been developed
specifically to replace the vehicle’s front brakes (due to the high
braking demands encountered there), rear brake systems are also offered
for selected applications. For vehicles not offering a Gran Turismo
System for the rear axle, Brembo Sport brake rotors (slotted or drilled)
are available to replace the stock rotors on the rear axle and provide a
matched appearance on all four corners of the vehicle.
Gran Turismo Brake Systems packages combine high performance fixed
aluminum brake calipers, large diameter 1- or 2-piece vented brake
rotors, brake pads, stainless steel braided brake lines and aircraft
quality mounting brackets and hardware. (See photo and chart below.)
Brake caliper and rotor sizes are selected based on the vehicle’s
requirements. In most cases, the aluminum calipers are available in red,
sliver or black finishes. Additionally, the rotors feature plain,
drilled, slotted, or drilled & slotted disc surfaces depending on the
vehicle application and brake system selected. All cross-drilled holes
are bi-angle chamfered at the rotor’s outer surfaces to help reduce the
cracking caused by repeated, high stress, high temperature brake
applications. Gran Turismo brake discs are coated for corrosion
resistance to help eliminate rust and to offer a bold, aggressive
appearance to enhance the look of the vehicle’s road wheels.
Typical Brembo Gran Turismo kit components
include:
|
Qty
1
1
1
1
1
1
1
1
2
2 or 4
2
2
2
1
1 |
Item Description
Right caliper (with brake pads
installed)
Right caliper bracket, with nuts and
washers
Right rotor (disc & bell assembled)
Right Goodridge® stainless steel
braided brake line
Left caliper (with brake pads
installed)
Left caliper bracket, with nuts and
washers
Left rotor (disc & bell assembled)
Left stainless steel braided brake
line
Brake caliper inlet fitting or banjo
bolt
Brake caliper inlet copper sealing
washer
Brake bleeder hose
Loctite Capsule
4-inch Brembo die-cut sticker
Caliper bracket diagram
Installation Instructions |
Exact specifications/dimensions vary per
vehicle’s requirements. Find your vehicle’s exact caliper and rotor
specifications using "Shop for Brake Components" above.
Download Application in PDF
|
