Finish: Carbon fiber front panel with Black buttons
feature listing
> SINGLE DIN FITMENT
> VEHICLE/ECU AUTOMATIC IDENTIFICATION
> SUPPORTS 16 PIN OBD CONNECTOR CARS
> LIVE DATA MONITORING (display layout can be custom
configured)
- Battery voltage - Volts
- Engine Speed - RPM
- Vehicle road speed - MPH or KMH
- Coolant temperature - Degrees C
- Intake temperature - Degrees C (This is not charge
temp.)
- Fuel injector pulse width - Milliseconds
- Ignition point - Degrees BTDC
- Knock correct - Degrees (Ignition Timing)
- Lambda air/fuel ratio
- Throttle position - %
- Air flow meter mass - Grammes Per Second
- Boost pressure - Bar (additional sensor required)
- Oil Pressure (additional sensor required)
- Oil Temperature (additional sensor required)
- Exhaust Gas Temperature (if available from ECU)
> READING OF CURRENT AND HISTORIC FAULT CODES
> ECU/FAULT CODES RESET
> SHIFT LIGHT CONTROL WITH ADJUSTABLE SETPOINT (LAMP NOT
SUPPLIED)
> EXTERNAL ALARM/SHIFT LIGHT OUTPUT
> USER ADJUSTABLE ALARMS MONITORING
- Battery voltage low
- Battery voltage high
- Boost pressure (additional sensor required)
- Coolant temperature
- Oil Pressure (additional sensor required)
- Oil Temperature (additional sensor required)
- Exhaust Gas Temperature (if available from ECU)
> WATER INJECTION/NITROUS CONTROL
> RECORDS PEAK READINGS (USER RESETABLE)
- Engine speed - RPM
- Boost Pressure - Bar (additional sensor required)
- Road Speed - MPH or KMH
- Coolant Temperature - Degrees C
- Oil Pressure (additional sensor required)
- Oil Temperature (additional sensor required)
- Exhaust Gas Temperature (if available from ECU)
> CLOCK
> USER SELECTABLE OPTIONS:
- BAR or PSI
- MPH or KMH
- Degrees C or Degrees F
- Boost ECU or Boost External
- Lambda or AFR
> MPH TO KPH
> NOTE: Unit features may vary according to
specification of vehicle ECU supplied data.
